Fenix E35 V3.0 Flashlight black
Fenix E35 V3.0 Flashlight black
Utilizes Luminus SST70 cool white LED, with alifespan of 50,000 hours.
Ultra-thin optical lens for soft and balanced beam.
Digitally regulated circuit for maintaining a stable output.
Reverse polarity protection, to protect from improper battery insertion.
Boot-up battery level indication and low-voltage warning.
Made of A6061-T6 aluminum.
Premium type HAIII hard-anodized anti-abrasive finish.
Operating Instructions: On/off: Press and hold the 0.5 seconds to turn on/off the light.
Output Selection: With the light turned on, single click the side switch to cycle through Eco→Low→Med→High→Turbo.
Strobe: With the light switched on, press and hold the side switch for 1.2 seconds to enter Strobe, single click the side switch again to turn back to the previously used output level.
Intelligent Memory Circuit: The light memorizes the last selected output excluding strobe. When turned on again the previously used output will be recalled.
Battery Replacement of the E35 V3.0 3000 Lumen Flashlight: Unscrew the light head and insert the battery with the anode side (+) towards the light head, then screw the light head back on.
Intelligent Overheat Protection: The light will accumulate a lot of heat when used on Turbo and High output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of Turbo mode.
Low-voltage Warning: When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, the battery level indicator blinks red to remind you to timely recharge or replace the battery. *Note: This only works with Fenix ARB-L21 Series 21700 rechargeable Li-ion battery.
E35 V3.0 Size: Length: 4.65” (118mm) x Diameter: 1.04” (26.5mm)
E35 V3.0 Weight: 2.36 oz. (67g) excluding battery
E35 V3.0 Battery: 1 x 21700 Li-ion rechargeable battery (included)
Included in the box: ARB-L21-5000U Li-ion battery, USB Type-C charging cable, lanyard, spare O-ring
Out of stock
RM369.00
Nitecore MT2C Pro Flashlight Features: Utilizes a UHi 20 LED with a max output of 1,800 lumens Colour Temperature: Cool White Max peak beam intensity of 67,000cd and max throw of 520 meters An optical system combined with crystal coating and “Precision Digital Optics Technology” (PDOT) A single tail switch controls 2 brightness levels Powered by an 18650 (Included) high capacity Li-ion battery while compatible with 2 x CR123 / RCR123 batteries (Not Included) Includes a NITECORE 18650 rechargeable Li-ion battery (NL1836R 3,600mAh) with a built-in USB-C charging port, offering a runtime upo to 28 hours Highly efficient constant current circuit provides a stable output Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6) Electronic reverse polarity protection Optical lenses with double-sided scratch resistant coating Constructed from aero grade aluminum alloy HA III military grade hard-anodized finish Tail stand capability Stainless steel clip included Waterproof and dustproof rating accordance with IP68 (2 meters submersible) Impact resistant to 2 meters Dimensions: Length 117.5mm, Body Diameter 24.4mm, Head Diamter 26.8mm Weight: 64g Package Includes: 1 x Nitecore MT2C Pro Flashlight 1 x Nitecore 18650 3600mAh Li-ion Rechargeable Battery (NL1836R) 1 x USB-C Charging Cable 1 x Lanyard 1 x Spare O-ring 1...
Nitecore EDC25 Rechargeable Flashlight Features: Utilizes 2 x UHi 20 LEDs with a max output of 3,000 lumens Colour Temperature: Cool White Uses a precision metal orange peel reflector, perfectly combining long range and wide angle illumination Max peak beam intensity of 22,500cd and max throw of 300 meters 4 brightness levels to cycle through Brightness Levels: Turbo: 3000 lumens High: 1000 lumens – 1 hr 30 mins runtime Mid: 200 lumens – 4 hrs 15 mins runtime Low: 65 lumens – 14 hrs runtime Ultralow: 15 lumens – 55 hrs runtime Plus Strobe (3000 lumens) One button customizable access to TURBO or STROBE READY STROBE Mode uses randomly changing frequencies for stronger dizzying effects Power indicators indicate the remaining battery power Level indicators indicate the current brightness level Built-in 1,700mAh Li-ion battery Advanced Power Cut-Off (APC) technology for an ultra-low standby power consumption Highly efficient constant current circuit provides a stable output up to 55 hours Dual tail buttons enable intuitive operations Intelligent Li-ion battery charging circuit with a USB-C charging port 2 lockout modes available (Half Lockout Mode and Full Lockout Mode) Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6) Constructed from aluminum alloy with HA III...
Description
Spot on! With the compact iW7R, your work light is always at your fingertips.
What brightens anyone’s day: The powerful luminous flux of up to 600 lumen, the flexible tilt mechanism for optimal illumination, as well as the elegant premium housing. No cable clutter: The iW7R conveniently charges via the included charging station in only four hours, or with the 5-station combo charger sold separately.
The rechargeable penlight i4R convinces through its lighting performance with a run time of up to 18 hours, and easily fits into any pocket due to its small size. The patented Advanced Focus System allows for step-less and precise focusing of the beam and turns the flashlight into a tool for work in a dark environment.
Eveready Value Metal Rechargeable Light VMHAL8 Batteries Type | Rechargeable Lithium Ion (Non – Removable Battery) Charging Time | 4.5 Hours Max brightness | 320 Lumens Min brightness | 130 Lumens Max runtime | 4 hours (Low Modes) Min runtime. | 3 hours (Hight Modes) Max beam distance | 130 m Enhanced user’s experience Light modes | 3 (High,Low,Strobe) Compact and lightweight design with comfortable Weatherproof ANSI FL1 IPX4
The P7 Core as successor of the P7 still has one of our most innovative light technologies, the patented Advanced Focus System, which allows a continuous transition from a broad flood beam to a sharply focused long-distance beam. In addition, the P7 Core features Rapid Focus technology for single handed operation and continues to use four AAA alkaline batteries.
Powerful premium flashlight with numerous proven Ledlenser technologies and natural color reproduction (CRI 80)
LED Lenser IL4 Description Small and handy as a pen, but most importantly, safe. As small and handy as a pen but as rugged and most importantly as safe as other lamps in the iL series: The Ledlenser iL4. Designed specifically for environments where explosive atmospheres such as flammable gases, vapors or dust clouds can occur for a short period. And yet it’s the cheapest lamp in the iL series. So not even costs will explode. Extremely lightweight (65 g incl. batteries) Extremely small and handy (L 14.0 cm) Battery operated, uses 2x alkaline AAA Suitable for use in environments with gas group IIA, B or C (up to T4) or dusts group IIIA, B or C (up to T135°C) Light Functions These settings are a pure, bright delight: Power – high light output for every situation Switches Turn, press or both – how to switch these Ledlenser on: End Cap Switch – a switch on the end of the light (end cap). Special functions That special something about this Ledlenser: Ex-Zone 2/21 Suitable – The first torch for Ex-Zone 2/21 areas with patented Advanced Focus System Small and Handy – Measuring at just 14 cm in length and weighing...
The NITECORE MT21C compact multi-functional flashlight uses an innovative 90 degree tiltable head, giving you the unique ability to use the light as a streamlined everyday carry torch or a versatile angled work light. Equipped with a powerful CREE XP-L HD V6 LED capable of 1000 lumens and 184 meters of throw, making it a great choice for professional and recreational uses alike.
This multi-functional torch can also a Notfallblinker, Lantern, waterproof casing to use and it floats on the water and switches on when in contact with wet automatically.